Deviations

Deviations occur as defined in the Device Measurements Summary for the supported phases, see Supported Phases.

Deviations are typically raised against values specified in the cycle definition. If a cycle definition does not contain a specified value or a minimum and maximum, then the deviation will not be raised. When a deviation occurs, the system will register an alarm.

Section Supported Phases lists all supported phases and includes a “Device Measurements Summary” subsection for each phase in which it is defined exactly what information is reported in the phase summary. If any of the listed device summary measurements listed for that phase fall outside of specified alarm tolerances, a deviation will be registered and subsequently indicated on the report. Where “Final” values are specified, those are to be checked against the last recorded value during a given phase.